Setup Riedel MediorNet
You can control Riedel MediorNet devices from Disguise software.
This topic assumes you have already configured the matrix via the Riedel web interface. It is important to enable the Ember+ 3rd Party interface and assign ID's to the inputs & outputs, as these will be the indicies use in Disguise software. Remember to do both Directions, In and Out. For more information, refer to the Riedel Matrix documentation.
There is a known limitation of only being able to modify video channel connections.
-
In Disguise software, create a MediorNet matrix device. A MediorNet device is created in the same way as any other device type. Please see the earlier sub-chapter Creating devices for step-by-step instructions on how to create a device, and select MediorNet Matrix from the menu of different device types. This will open the MediorNet Matrix device editor.
-
Configure the MediorNet Matrix to the same IP range as the Director/Actor network.
-
Configure the device using the properties contained in the MediorNet Matrix device editor.
MediorNet Matrix device editor
IP address
The IP address of the matrix.
Port
The UDP port to send commands on.
Test input
The test input number.
Test output
The test output number.
