Internal system restore is the process of doing a factory restore on the system.
REDISGUISE is the process of doing an update or restore on the system using a bootable USB drive.
Neither of these restore processes affects the media drive of the server.
Please note: This procedure will only work with OS version 10 and greater.
To locate your OS version please go to d3manager- Help - About d3manager.
Warning: The system needs to be connected to the internet during this procedure. If it is not, or it loses internet connection during the process - windows activation will fail.
-
Hold down shift whilst restarting the system.
-
Select Use another operating system
-
Select Reset OS.
-
The system will reboot into the internal re-imaging system which will reinstall the Operating System and revert settings to factory
Windows should activate automatically, as long as the machine was connected to the internet for the duration of the re-imaging process.
If windows does not activate during the re-imaging process, follow these steps.
-
Wait for a few minutes after the re-imaging process has completed to allow the server time to activate Windows.
-
Navigate to the System tab by right clicking on the Windows start menu and selecting System
-
In the System window, check to see if you have valid Windows license information visible. If you do not, contact the disguise support team.
Please note: If you experience any problems during updating or restoring the system, or any of these instructions are unclear, please contact the support team.
Warning: The system needs to be connected to the internet during this procedure
The gx range handles updates by using installers which are firmware packages that encompass updates from the ground up.
This process can be used to update to a newer OS image, or revert to a previous OS image.
To tell what OS image your system is on please go to the help menu in d3manager and select About d3manageranager.
-
A 32Gb USB memory stick
-
A version of Rufus to turn it into a bootable disk. Make sure the volume name of the USB is: "REDISGUISE" as per image
-
An internet connection to the machine you are re-imaging
-
Download and install a version of 7Zip
-
Download and unzip the multi file archive using 7Zip
-
OS images can be found here.
Please note: You do not need to extract all parts individually. Simply place them in the same directory and then use 7zip to extract the ISO by selecting any part. 7zip will automatically unzip all parts to create the image file.
-
Download and unzip the multi-file archive using 7Zip (NOTE: you will only need to unzip file 001):
.png)
-
Create Bootable USB stick with the unzipped ISO.
The settings should be:
-
Partition scheme - MBR
-
Target system - BIOS (or UEFI-CSM)
-
Volume label - automatically pulled from ISO file
-
File system - NFTS
Warning: These settings are critically important. The re-image process will fail if they are not set correctly.
-
Please note: On the latest versions of Rufus you may see this warning. This is expected and does not apply to current disguise hardware. Please click OK to continue as normal.
-
Go into the BIOS by hitting Delete on the logo splash screen during boot.
-
Navigate to the Boot tab using the arrow keys and select Harddrive BBS Properties. Hit Enter to access the properties.
-
Navigate to the Advanced tab and change the Boot option #1 to the USB stick
-
Do not select Save and Exit. Hit escape, and navigate to Save & Exit tab.
-
Select your USB stick from the Boot override menu. Press Enter.
-
Be ready to hit any key to confirm USB boot immediately after.
Please note: performing a system restore from the new disk image will erase any valuable data on your system drive. Please ensure you make a back up of any essential files from your system (C:) drive before initialising this process. The process does NOT destroy any media or projects on your media drive.
