Skip to content
Disguise User Guide
⚠️ If you use IP-VFC cards, we recommend updating to r29.0 or later. This will also require a firmware update which you can perform using the IP-VFC firmware updater tool on the Resources page under the VFC Firmware Update tab.

IP-VFC Workflow

Using an IP-VFC card

  1. Open the Designer project.
  2. Configure the IPVFC settings.
  3. Click Apply the Feed Settings.
  4. Enter the network IP address.
  5. Copy the addresses of the four outputs.
  6. Save the addresses in a .txt file.
  7. Configure the four outputs on the Helios LED processor.
  8. Paste the output addresses into the URL in the .txt file.
  9. Add the four output URL addresses to the slots.
  10. Select a test clip for each output.
  11. Confirm that the clips appear correctly on the LED volume.

Watch the video of the IP-VFC workflow on a VX 4 with Helios LED processor