Onboard Audio

The Onboard Audio card has one channel of audio input and one channel of audio output.

These connections are made over mini-jack (3.5 mm) connections. There is 1 point of connection both for input and output.

One is for line level audio and one is for mic level audio.

Solo can receive LTC input through the microphone input but care must be taken to set the correct volume values. If the volume is set too loud, it will not work properly. The recommended settings in windows is +0db (off).

Note

Please note: Audio does not appear as a configurable device unless a mini-jack is connected on the back of the system.