Setup PureLink Matrix
Setting up a PureLink matrix
Section titled “Setting up a PureLink matrix”- Configure the PureLink matrix to the same IP network as the Director/Actor network.
- Choose port 23 in the matrix configuration.
- In Disguise, create a PureLinkMatrix device. A PureLinkMatrix device is created in the same way as any other device type. Please see the Creating devices section for step-by-step instructions on how to create a device, and select PureLinkMatrix from the menu of different device types. This will open the PureLinkMatrix device editor.
- Configure the PureLink matrix device editor by referring to the device properties below.
Pure LinkMatrix device properties
Section titled “Pure LinkMatrix device properties”IP address
Section titled “IP address”
The IP address of the matrix.
The TCP port number configured in the matrix. Set it to 23.
Router ID
Section titled “Router ID”
The ID number set on the matrix.
Test Input
Section titled “Test Input”
This input allows you to specify a test input.
Test Output
Section titled “Test Output”
This input allows you to specify a test output.
Test route
Section titled “Test route”
Once you have selected a test input & output, click the Test route button to confirm whether the routing works.