Navigator Driver
このコンテンツはまだ日本語訳がありません。
The port number the automation data is coming in on.
IP Filter
Section titled “IP Filter”The remote IP that the data is coming in on (optional).
Multicast Address
Section titled “Multicast Address”The multicast address the data is coming from (optional).
FTSI Navigator UDP Packet Format
Section titled “FTSI Navigator UDP Packet Format”Designer requires the Navigator system to send data in a specific format. Each axis should send data in the following format.
ID:POS,VELOCITY;
ID = Axis ID
POS = Axis position as a floating point number
VELOCITY = Axis velocity as a floating point number
Example:
Section titled “Example:”1:-24.034,1.323;
Multiple axes can be combined in the same message,
ID:POS,VELOCITY;ID:POS,VELOCITY;ID:POS,VELOCITY;.....
1:-24.034,1.323;2:5.346,12.098;3:9.064,2.511;