4x4 Performance
このコンテンツはまだ日本語訳がありません。
Playback
Section titled “Playback”The following table shows how many layers can simultaneously be played back per codec:
Benchmarks - Video Layers (Full HD)
Section titled “Benchmarks - Video Layers (Full HD)”| Video Codec | Content Data Rate (MB/s) | Max Layers on 4x4 |
|---|---|---|
| HD HAP | 27.8 | 43 |
| HD HAPQ | 31.3 | 40 |
| HD Animation | 107 | 16 |
| HD TIFF Sequence | 237 | 8 |
| HD NotchLC | 65.31 | 23 |
| UHD HAP | 95.4 | 18 |
| UHD HAPQ | 143 | 12 |
| UHD Animation | 697 | 2 |
| UHD TIFF Sequence | 949 | 2 |
| UHD NotchLC | 233.91 | 8 |
- All content is 30 fps
- Readings are taken from an
- VFC-compatible machines run with pass-through style cards (HDMI or DP)
- 60Hz project
- Genlock on all machines which support it
- One unique video file per layer, all mapped onto one screen
- Absolute maximum level of performance
- One more layer means the system starts to drop frames
- Measured against 15.3.2, build 57746
Capture Latency
Section titled “Capture Latency”The following table provides data on how many frames of latency the EX 3 requires from capture to output:
4x4 SDI
Section titled “4x4 SDI”| Refresh Rate | Normal mode (frames) | Low Latency mode (frames) | Ultra-Low Latency mode (frames) |
|---|---|---|---|
| 60Hz | 4-5 | 4 | 3 |
| 50Hz | 4-5 | 4 | 3 |
| 30Hz | 4-5 | 4 | 3 |
4x4 NDI®
Section titled “4x4 NDI®”| Refresh Rate | Normal mode (frames) | Low Latency mode (frames) | Ultra-Low Latency mode (frames) |
|---|---|---|---|
| 60Hz | 5-6 | 5 | 4 |
| 50Hz | 5-6 | 5 | 4 |
| 30Hz | 5-6 | 5-6 | 4 |